Chain and Ribbon Charm Bracelet- A Tutorial of Sorts.

Welcome to Handmade Monday! This week I have been making chain and ribbon bracelets, it’s a new technique for me and I thought I would write a sort of tutorial to show you what I did and leave myself a record to look back on. It is really easy and I think it is quite effective, I have lots of different ideas using different coloured ribbon and chain, I think I will be visiting my local haberdashery shop very soon!

You will need..

A length of chain (enough to go around your wrist) Make sure the links are big enough to pass the ribbon through.

A length of ribbon. I used a piece a good few inches bigger than the chain.

A clasp of your choosing.

Jump rings

Charms

The usual jewellery making tools ( I used  flat and chain nosed pliers and memory wire cutters)

Method

1.

Cut a length of chain long enough that it will fit around your wrist. I found when making the bracelets that the chain seemed to bunch up a little as I threaded the ribbon through so you may want to add a cm or so extra but don't forget that you will be adding a clasp. It may be better to add the ribbon until you get to your desired length then cut the chain. Do whatever you find easiest. I used memory wire cutters to cut the chain.

2

Tie the ribbon to one end of the chain. You can add a dot of glue to the knot when you have finished the bracelet to make it extra secure. I didn't have any glue so used clear nail varnish which seemed to work just as well.

3

Start to weave the ribbon through the links of the chain. You may find it easier to thread the ribbon onto a needle ( a darning needle would be ideal) just make sure the eye can pass through the links. I spent ages looking all over the house for my big needle only to realise that it wouldn't fit. Frustrating!


4

After all that threading, have a rest and a cup of tea. When you have finished your brew, tie the ribbon to the end of the chain.


5

Add your clasp, I had a nature theme in mind so chose a clasp with a flower and leaf design.

6

Set your charms out where you think they would look good. I think this is much easier than adding them as you go and then realising you don't like the look, but use your own preferred way of working.

7

Try not to drop your bag of jump rings.There are a good few hundred in there and I am still picking them out of the carpet. Rarrrrr!


8

Add the charms to the bracelet using the jump rings and there is is- the finished bracelet. There are loads of different colours you could use and different charms too.

Have a great week!

P.M.C Moon - a tutorial of sorts.

Happy Easter!
I thought I would do something a little bit different for this Handmade Monday. I'm still a beginner when it comes to using silver clay but I thought it would be useful to write a sort of step by step tutorial type thingy showing you how I made a silver moon ( a present for my mum who, like me, loves all things shiny and colourful.)The chances are the way I have made the piece isn't altogether the best way, so follow my instructions at your own risk!   Ok.. my very first tutorial coming up...

1. For the first stage I used all the items in this pic. There is.. a bottle of olive oil (nicked.. I mean borrowed.. from my mums cupboard), Silver paste (low fire), a paint brush, embeddable bails (you can fire these in the kiln), embeddable gems, different sized circle cutters, low fire art clay, rolling guides (to get the clay to a uniform thickness), a roller and a plastic wallet to provide a work surface (not ideal if you are using a scalpel to cut out shapes as it will rip the wallet but it will do for this )

2. rub a tiiiiny amount of olive oil onto the plastic wallet and rub some onto your hands, this will prevent the clay from sticking. Try to use only a small amount as it can make the clay slide about. Using the guides, roll out the clay to a uniform thickness.

3. Cut out two circles, one as big as you want your moon to be and the other just big enough that it will take the bail (the clay will shrink when fired so make sure you account for this when choosing the small circle. If the circles of clay wont come out of the cutters, use the paint brush to gently poke them out. Wrap the left over clay up and put away in the airtight bag immediately (it dries up very quickly).

4. Push the bail into the small circle and put to one side.

5. Use a slightly small cutter than the one you used to make the larger circle and position it on the clay so that when you cut it out it makes a shape you are happy with. There are probably some moon shaped cutters out there but using two circles works.

6. you will end up with a shape like this. It looks a bit rough but it will be cleaned up when dried.

7. Push the gems into the clay.

8. Turn the piece over and using plenty of paste on the paintbrush, "glue" the bail onto the back.

9. Leave the moon to dry overnight or you can use other methods. Some people use a mug warmer, other people put it in a slightly warm oven. I just leave mine overnight or place it somewhere warm. Just make sure the item is really dry before you fire it or it can crack.Once it is dry it will be really brittle so handle carefully, you can mend broken pieces with paste.Smooth rough edges with the needle files and the sanding pads. Spend a good while on this, you want a nice smooth surface for polishing once it is fired.

10. I didn't spend enough time filing and sanding around the gems, told you I was a beginner! I should have filled in the holes with paste and let it dry again before re sanding... A lesson learnt for next time!

11. Once you are happy with how your piece looks, you can fire it! Metal clay can be fired in a kiln, with a small kitchen type blow torch or over the hob of a cooker. Follow the instructions in the packet for how long you need to keep the heat on for your chosen method. I'd recommend having a look at some youtube videos too, to get an idea of the different methods. Be safe! Things get really hot.

12. Once fired the piece will be white. You need to give it a good rub with a wire brush. Be careful, the wire bristles can hurt! Try not to scratch the gems. To get a mirror shine you need use the sanding pads, starting with the lowest number and working up. Rub with the sanding pads and don't move up to the higher grit until the sanding pad seems to "slide" over the metal. When you are satisfied that you have gone as far with the sanding pads as you can, give the moon a rub with some silver polish and a soft cloth. You can see in the pic of the finished moon where I haven't spent enough time working on the dry, pre fired piece, TAKE YOUR TIME!! It's so easy to want to rush and see what the piece looks like when fired.

13. You can thread the moon on to some chain and then you can enjoy wearing your handmade, unique, piece of jewellery.


Well, I hope that was ok and easy to follow. I may write a few more of these in the future. :)

LH
x

Find me on Facebook at Little Harriet